|
ALUMINUM DOOR REED SWITCH (LED TYPE)
|
||||
| MAC-705 LED ( OLD LED TYPE) | |
|
|
•Model
No: MAC-705 LED ( OLD LED TYPE) •Snake Tube + Lead wire •Wide GAP up to 20(5-30)mm •LED: When customer setup sensor not well, LED will warming, Adv customer need check again. •Use to Aluminum Door •Reed Size: 50×40x(H)11mm |
| MAC-705S-small-3cm | |
|
|
•Model
No: MAC-705S-small-3cm •Snake Tube + Lead wire •Wide GAP up to 30mm •LED: When customer setup sensor not well, LED will warming, Adv customer need check again. •Use to Aluminum Door •Reed Size: 50×40x(H)11mm |
| MAC-705S-small-4cm | |
|
|
•Model
No: MAC-705S-small-4cm •Snake Tube + Lead wire •Wide GAP up to 40mm •LED: When customer setup sensor not well, LED will warming, Adv customer need check again. •Use to Aluminum Door •Reed Size: 50×40x(H)11mm |
| MAC-737 LED-NC (LED TYPE) | |
|
|
•Model
No: MAC-737 LED-NC (Aluminum Door Reed Switch + LED Warming Light ) •Snake Tube + Lead wire •Wide GAP up to 20(5-30)mm •LED: When customer setup sensor not well, LED will warming, Adv customer need check again. •Use to Aluminum Door •Reed Size: 50×40x(H)11mm |
|
ALUMINUM DOOR REED SWITCH
|
||||
|
ALUMINUM WINDOWS REED SWITCH |
|
| MC-503 | |
|
|
•Model
No: MC-503 (Windows Use Type) •Lead wire •Wide GAP up to 25-45mm •Set up windows Up and Erection ditch (Esoteric Type Magnet Switch) •Reed Size: 68×8.5×H11.5mm •Magnet Size: 30×11×12.5mm |
| MC-501 | |
|
|
•Model
No: MC-501 (Windows Use Type) •Lead wire •Wide GAP up to 25-45mm •Set up windows Up and Erection ditch (Esoteric Type Magnet Switch) •Reed Size: 68×8.5×H11.5mm •Magnet Size: 68×8.5×H11.5mm |
|
ALUMINUM DOOR REED SWITCH |
|
| MC-303 | |
|
|
•Model
No: MC-303 (Aluminum Door Reed Switch) •Lead wire •Wide GAP up to 45mm •Reed Switch Size can stretch (100-150mm), Also can rotate 270 degree •Use to Aluminum Door •Reed Size: 120×55mm •Magnet Size: 100×80×27mm |
| MAC-708A AL-NC | |
|
|
•Model
No: MAC-708A AL-NC •ARMORED CORE •OVER 50mm GAP •USE FOR Hi-Temp (W/Snake Tube) •SIZE: 70×23.5×16mm |
| MAC-706W AL-NC | |
|
|
•Model
No: MAC-706W AL-NC (Without Armored core) •Leadwire •OVER 35mm GAP •USE FOR Hi-Temp ( Without Snake Tube) •SIZE: 50×19×9.5mm |
| MPS-99 | |
|
|
•Model
No: MPS-99 PULL SWITCH •DC 30V/1A •OPERATING PULL: 2KG •PULL LINE: 20KG •SIZE: 96×30×30mm |
| MC-101 | |
|
|
•Model
No: MC-101 Shutter Sensor •Use for Roll-up Garage Door(MC-101) •MC-101: 68×27.6mm |
| MC-202 | |
|
|
•Model
No: MC-202 Shutter Sensor •Use for Roll-up Garage Door(MC-202) •MC-202: 73×40mm |
-New.JPG)
.JPG)
